Istituto Nazionale di Fisica Nucleare   Sezione di Ferrara

Librerie DAQ

In questa pagina vengno proposti librerie opensource per sistemi DAQ.

Librerie DAQ

SistemaDescrizioneautore
DAQ Digitizer CAENLabview DAQ system for digitizer CAEN models DT5751 (4 ch desktop USB/optical interface) and V1471 (32 ch VME/optical interface). DAQ System features: setup dgtz, acquire data, show waveforms, fast peak-peak analisys, save raw data, save txt file. Raw data can be processed offline with a dedicated Labview Processing software.Mirco Andreotti
DAQ TDC CamacLabview DAQ system for camac TDC LeCroy 4208/2277 via GPIB interface. It is used for students experiences. The system performs the readout of time difference between two signals (strat and stop), shows the acquired data on an histogram and saves histogram frequency on a txt fileMirco Andreotti
DAQ FERA CamacLabview DAQ system for camac FERA LeCroy 4208/2277 via GPIB interface. It is used for students experiences. The system performs the readout of the integrated charge in a gate signal, shows the acquired data on an histogram and saves histogram frequency on a txt file.Mirco Andreotti
Tektronix control systemC/C++ Control system for Tektronix oscilloscopes based on VXI-11 protocol via ethernet interface. It performs setup of the scopes and acquire waveform. This can be used with all scopes based on VXI-11 protocol, with dedicated variations.Mirco Andreotti
NI cDAQ Control SystemDimostrative Labview control system based on NI cDAQ. It was developed for students application. The program controls a thermal system varying sinusoidally the temperature outside a small room, records and shows inside and outside temperature on a chart plot. This is a clear example of comparison between thermal system circuit and electrical circuit. Mirco Andreotti
Temperature dataloggerLabview control system based on NI CompactRIO controller. It was developed for irradiation test of SiPM, but it could be modified for different application. Different modules are implemented: 4-serial port com, PT100 temperature measurements, analog I/O, digital I/O. The data saved locally on controller can be transfered via ftp with a dedicated Labview program or manually. Access to remote control panel via ethernet.Mirco Andreotti
Iseg HV PS Control SystemLabview control system for Iseg 2 ch HV Power Supply model NHQ 204M based on serial communication. Features: setup the power supply and monitor the status. The program can be easily extended for other Iseg power supply with different number of channels.Mirco Andreotti Daniele Bolognesi
3-Axis Movements Control SystemLabview control system for a 3-Axis movements system Zaber Technologies linear stepper motors. The program controls the system with VISA lib via usb connection. Features: manual movements of the 3-Axis, setup of a path-grid of sequence steps.Mirco Andreotti Daniele Bolognesi
ThorLab PM100D control systemLabview control system for the power metter ThorLab PM100D via usb interface. Features: setup the power meter and monitor the measurements.Mirco Andreotti Daniele Bolognesi
Laser digital variable attenuator control systemLabview control system for the laser digital variable attenuator OZ Optics via usb interface. The program setup the attenuator.Mirco Andreotti Daniele Bolognesi
PicoTechnology TC-08 control systemLabview control system for the usb-datalogger Pico Technolgy TC-08. Features: setup the datalogger and readout the measurementsMirco Andreotti Daniele Bolognesi

Help

Per ottenere supporto tecnico, rivolgersi al personale del servizio di calcolo: Michele Gambetti, Alberto Gianoli, Andrea Donati.